High-speed rolling door - AV 600

High-speed door developed for outdoor applications on medium-sized openings

AV600 is a high-speed door particularly suitable closing industrial passages with ordinary traffic intensity. It has technical characteristics very similar to the IM900 model, but with significantly smaller overall dimensions of the structure. Possibility of inserting a transparent section along the entire length of the curtain.

Download Brochure »

STANDARD DIMENSIONS OF THE TRANSIT AREA:

Minimum dimensions: W 2000 x H 2000 mm

Maximum dimensions: W 6000 x H 5000 mm

Application: internal/external

Opening speed: 0,7 m/sec

Standard metal structure:
self-supporting in sheet steel 1.5 mm pre-painted white RAL 9002 .
Optional: RAL painted or 304 or 316 stainless steel

Curtain or cover: Tear-resistant, PVC, warped in double weft 900 g/m². Variable section height. At eye level, an entirely transparent heat-sealed section along the entire width (optional separate inspection windows).

Optional:

4/5 mm thick fire retardant Class 2 insulated fabric made of PVC. Weight 1400 g/m²
double weft PVC fabric, weight 580g / m², self-extinguishing Class 1

Tear resistance: 500 N

Tensile strength: 4000 N

Wind resistance: certified class 2 (45 Kg/m²) with closed door

Stiffening pipes: made of galvanized steel with high yield strength to withstand high pressures.

Lifting belts: certified up to 2000 Kg

Roller shaft: diameter 120 mm supported by ball bearings

Side gaskets: in yellow PVC inserted in the jambs to facilitate curtain sliding and the insertion of cables for the installation of photocells or infra-red safety light curtain. Vertical brushes to increase air tightness.

Drive unit: three-phase motor 400 V-50 Hz with electric brake suitable for intensive use. Mechanical or digital limit switch (depending on the dimensions) incorporated into the gear unit, easy to inspect/adjustable. Thermal circuit breaker for protection against voltage surges.

Gear reducer: with long-life lubrication and maintenance-free. Fitted directly on the roller shaft or driven by a transmission chain

Emergency procedure:  release rod for manual opening of the curtain in case of power failure. When the rod is engaged, a safety micro-switch automatically cuts off power to the motor.

Please note: for high-speed doors over 20 m², we recommend the use of the automatic counterweight opening system.

CE UNI EN 13241-1 marking data:
-   Operating speed - up to 0.7 m/sec
-   Operating temperature -20°C, + 50°C
-   Wind load resistance with door closed - Class 2 (Class 3 on request)

Control panel: with 400V power supply and 24V low voltage auxiliary circuits with external display.
IP55 protection rating

Push-button panel: membrane push-button panel with “Opening — Closing — Pedestrian” button (partial opening) and EMERGENCY stop mushroom-shaped push-button. pre-wired electrical system: 400/24V separate voltage lines (as required by regulatory standards); photocells/safety light curtains, flashing light, electric brake, limit switch and motor are already connected to the junction box fitted with cables prepared for connection to the control panel.

High-speed door control KIT ››

See all ACCESSORIES and OPTIONAL EXTRAS ››

Colours available:

IMVA porte rapide colori